Advantages of Pulsed Light as an Alternative UV Source for Surface Sterilization

by | Feb 21, 2024

With the recent trend away from the use of mercury lamps for disinfection, many companies are turning to Excimer Lamps (ELs) and Ultraviolet Light Emitting Diodes (UV LEDs) as readily available and viable alternatives. But most are overlooking more a competitive option – Pulsed Light.

UV LED

UV LEDs are relatively inexpensive, low-voltage, and compact sources that can put out a narrow wavelength band of light. They require no special handling and are mechanically robust. UV LEDs require no “startup time”, but fire as soon as voltage is applied. Their lifetimes are well in excess of 20,000 hours, but not as long as those of more conventional LEDs, which are typically in excess of 100,000 hours. UV LEDs are also significantly more expensive than conventional LEDs and require voltages that are generally significantly higher. The efficiency is lower for UV LEDs than for other types of LEDs. Nevertheless, pricing, voltages, and efficiencies are still in the range that makes these units economically effective alternatives. The biggest drawback is the output power, which for deep ultraviolet LEDs currently goes up to the tens of milliwatts into the small footprint of an LED. By comparison, low-pressure cylindrical mercury lamps put out about 250 mW per cm of lamp length at 254 nm in all directions.

Excimer Lamps

Excimer lamps are larger and require higher voltages, typically in the kilovolt range. Startup time is minimal (typically about a millisecond) and the output is into a relatively narrow waveband (typically tens of nm wide). Lifetimes are in excess of 5000 hours and outputs are tens of milliwatts/cm2, but radiated over a much larger area than with UV LEDs. Possibly the biggest drawback of excimer lamps is that, although there is a large range of possible emission wavelengths, only a few of these are at present commercially manufactured, and none of the available models has a good overlap with the DNA absorption band at 260 nm.

Pulsed Xenon Lamps

Pulsed xenon lamps can provide two significant advantages over either of these sources. The first advantage is far greater instantaneous light flux. This means that there is a very short duration yet very intense pulse of light, and this produces greater lethality than if the same amount of light was released over a longer period of time. There is evidence that integrated irradiation is not subject to reciprocity; a given number of photons does not always kill the same number of micro-organisms. The rate at which the photons are delivered makes a difference 1, 2 and short pulses appear to be at an advantage. One possible explanation is that high fluences make it more likely that a given strand of DNA will suffer multiple points of damage before they can be repaired by the cell’s mechanisms, thus making it more likely that the organism will die. This places a premium on ultraviolet sources that deliver high-intensity flux.

The other advantage of pulsed xenon light is that it is well-documented that although light coinciding with the DNA absorption peak at 260 nm ± about 20 nm, is essential for rapid and efficient sterilization (as was first uncovered brilliantly by H. S. Newcomber over a century ago 3, 4) the sterilizing effect is enhanced by simultaneously irradiating the surface with light at longer wavelengths as well. Exactly which wavelengths and in which proportion is not clear, nor is precisely how this works. It has been argued that some photochemical, photophysical, or photothermal effect is responsible. A. Wkehof 5 has argued that a range of wavelengths can be absorbed by the cell, causing a rapid and large rise in temperature that ruptures the organism. Other studies 6, 7, 8 have argued that light at 405 nm directly breaks down cell walls. Still, others have suggested that the longer wavelength light hinders cellular repair mechanisms. 9 Whatever the reason, it is evidently desirable to employ not only light near 260 nm but at one or more longer wavelengths, as well, in order to achieve the maximum lethality to microorganisms. UV LEDs and Excimer lamps only produce light near one wavelength, but broadband wavelength output is typical of pulsed xenon lamps, and the actual spectrum produced can be tailored by changing the gas mix, the applied voltage and current, altering the tube design, or by the use of filters.

For these reasons XENON Pulsed Light can provide better sterilization not only of bacterial, but also of viral and fungal contaminants.